Видео

Did you use a brush or a roller? Any details about the brand, size, etc? Thanks a lot

Did you use a brush or a roller? Any details about the brand, size, etc? Thanks a lot

Just subscribed to your channel you have gave me so much important information and help can't wait to start my living room now with a bit more confidence thanks joe!

I was thinking about lifting the panels out this weekend and spraying them on the floor. Can’t help thinking it would be a much better and easier method… Am I wrong?

Ideally, you need to advise the power is switched off as I’m sure some people will use a metallic scraper or similar to feed the paper in behind the socket cover and that could be dangerous if the power is still on.

Can we use 2k paint do u have any idea?

I painted my posts with the same paint as the fence .It lasts as long as the stain and looks good.

Can you pop around and show me a close up? 😂

Excellent and detailed video. It's certainly filled some gaps in my knowledge.

Nice video, good information, and sound tips , realistic, then most I've noted ✅️ 👍

Great work...I see the Gear S3 Frontier there..Mine is still going strong in 2024...the watch is a tank

Hi great video when I applied this it was a creamy colour when rolled on the wall is this the correct colour?

Good, clear explanation of the various rollers cages and sleeves. Thanks for sharing.

Nice work. What if the wall is extremely wide in a large room?

My walls were lined vertically then painted over. Parts of the wall are uneven and some of the seams have bubbled and need repasting. Must have been an amateur job. But why don’t you just paint overcoat on the walls?

Have tried scuff x on the walls ?

Thanks 🙋🏼‍♂️🏴󠁧󠁢󠁷󠁬󠁳󠁿👍🏻

That was very informative and explained well. Thank you

Love it, great video. Very detailed and clear explanation. Thank you.

❤❤❤

❤❤❤

Hi Joe i came across your video as i, am at a cross road deciding whether or not to use benjamin moore scuff x eggshell or Jonos AG satin white on all my wood work. ? I was wondering about scuff x eggshell white ? Vs Aqua guard , Which would be whiter and more durable? AG satin white or BM scuff-x Eggshell ? Also a professional painter - Phile Beckwith, he told me to always stick to the same brands when using UN & TC Adhesion wise. However, Johnstone's Trade Joncryl Water Based Primer Undercoat doesn't sell to me. Adhesion is Blockwork / Brickwork Cement render Concrete Plaster Softwood Wood. Caparol Haftprimer, Adhesion for bare and existing paint coatings, enamel coats, wood, zinc/galvanised surfaces, unplasticised (rigid) PVC, aluminium, copper and many other problematical substrates before applying acrylic enamels(PU-Matt/Satins/Gloss) How long have you been using Caparol Haftprimer under Aqua guard ? I have spent hours & days sanding off old yellowed gloss from x 4 doors x 3 windows. I want to try your system, Caparol Haftprimer under Aqua guard. But I fear if the Adhesion doesn't last ? Please let me know how long have you been using this system ? outta 10 ? for trustworthy & durable ?

Wooster STOLE my product 😢 ask Matt Doerfler of new product submission department he knows the truth 😮 WARREN PRO 3000 "THE HOOK " PAINTBRUSH ASK MATT he and Wooster knows whats up😮😮

Brilliant! You've said it just how I wanted. You've explained how and most importantly why. Best video I've seen on decorating!

Only video I've found comparing CS & BIN. Thanks! I'm painting cabinets. Store recommended BIN over CS, but I'm concerned about the quick drying time and your statement about 2 coats of BIN. Which primer would you use on cabinets? Thanks

Hi I've used this primer for a water leak in bedroom. I have give it 1 coat, but it does not look white is this normal? It looks the same colour as the water stain. I'm still waiting to give it top coat. Thanks

Nice, I’m using water based paint. I’ve noticed that when I’m removing the tape after the second coat , I’m peeling of the paint in few spots.

Well explained mate! Thanks you

Put a water based primer on it if it's going from oil base to water base finish then finish it with a water based top cost 🤷‍♀️

palatine msp oil based satin and gloss best on the market all i use now interior and exterior its a pre 2010 paint cause there a very small manufacturer they didn't have to change their formulas so no early yellowing and very hardwearing no having to burn off paint on interiors which is ridiculous if you ask me shouldn't happen

Brilliant video, just what I was looking for, thank you. Can I ask, once you applied 2 coats of Coverstain to the stained area did you then apply 2 top coats of the finish paint to just the stained area or the whole ceiling?

I feel confident to tackle this now. Thank you!!!

That looks awesome btw

Spunge 😊

Thanks for a Good video, super helpful.

After watching this video I am now looking forward to wallpapering tomorrow. Thanks.😊

I’m doing ceiling exactly like that but underneath the vinly there’s another thin piece of wallpaper underneath which is extremely hard to take off, any suggestions?

Oil based doors --- sand them-- bin prime them--ready to put water based on . Correct?

can I use this model to BIN Prime kitchen cabinets? also what tip would u use to spray kitchen cabinets?

Thanks that has helped

Can i use lining paper on cement rendered walls so i can get a smooth finish for wallpaper to be applied?

Brilliant video!

Quick tip, just use antifreeze, exactly same as pump armour, and can get 5lts for 20quid, used it for years in my impact 440 and airlessco's, can run it through those then stops any freezing issues over winter as well

Hi Joe, I wanted to thank-ypu for this excellent video. It is really clear and well explained giving lots of detail to help educate people. Cheers.

Would you spot prime with selected top coat paint once the cover stain is dry?

What temperature do you warm the paint up to?

hey, you are brilliant, you are a PRO!

Excellent tutorial! Thanks for taking the time to explain the difference. Much appreciated.

Couple of quick questions Joe, (great video by the way.), So, basically old walls that have been dot & dab plasterboards installed and then plastered , this was then misted over with Dulux trade matt, and then finished with 2 coats of the undiluted matt, the finished painted walls are a nice flat matt but not a dusty dry like they would be if a contract paint was used, unfortunately though we have a very persistent vertical crack which we've filled & sanded numerous times with every flexible filler on the market, but it just keeps coming back, so we've now decide to now use lining paper on this one wall and then paper over the lining paper with a nice finishing wall paper as a feature wall. My query is this, will the wet paste on the finishing paper cause the lining paper to bubble, if so how do we prevent this ? Also what make & grade lining paper would you recommend ? Thanks.